According to Document No.3 of CNCA in 2024, the testing method of China RoHS will be adjusted from the original testing standard GB/T 26125 to the series standard GB/T 39560. That is to say, from March 1, 2024, the new test standard GB/T 39560 series will replace the old test standard GB/T 26125.

On March 1st, 2024, ECHA launched a public consultation on two potential candidate substances for SVHC, including triphenyl phosphate and dicumyl peroxide. The public consultation period lasts until April 15th, 2024, during which all stakeholders can submit comments to ECHA. ECHA will comment on the feedback submitted by the public, and finally determine the substances officially included in the 31st batch of SVHC candidate list.

On December 27th, 2023, TEC India issued an announcement to postpone the mandatory implementation date of the third and fourth phase products of MTCTE, and extended the mandatory implementation date of 12 categories of products covered in Appendix I of the announcement from January 1st, 2024 to April 1st, 2024.

On February 9, 2024, the European Commission issued a draft regulation to amend (EU) No.10/2011 and (EC) No.1895/2005, replacing and repealing (EU) 2018/213；; The draft law prohibits the use of bisphenol A in food contact materials and products, and also regulates the use of other bisphenols and their derivatives. The draft law is currently under public consultation, and the deadline is March 8, 2024.

On January 18th, 2024, the Consumer Product Safety Commission (CPSC) published the final rules on the mandatory standard 16CFR part 1250 \"Safety of Children\'s Toys\" in the Federal Gazette, and approved the revised ASTM F963-23 as the mandatory toy safety standard. Unless CPSC receives important objections before February 20, 2024, it will take effect on April 20, 2024.

On January 23rd, 2024, ECHA listed the 30th batch of five substances in substances of very high concern (SVHC). At the same time, it updated the hazard types of dibutyl phthalate (DBP), which was listed in SVHC in October, 2008, and supplemented its endocrine disrupting characteristics to the environment. At this point, the REACH substances of very high concern list has officially increased to 240 items.

On January 25th, 2024, the National Certification and Accreditation Administration issued the Announcement No.3 of 2024 on adjusting the applicable standards of testing methods of the conformity assessment system for the restricted use of hazardous substances in electrical and electronic products.

The FCC certification regulation of wireless charging is FCC Part15C§15.209, and the frequency of use of the product needs to meet the scope of Part15 C 15.205 (a), that is, the equipment authorized according to Part 15 shall not operate in the 90-110 kHz frequency band. In addition to meeting the regulatory requirements, products must also comply with the conditions of KDB680106. According to the new requirement KDB (KDB680106D01 Wireless Power Transfer V04) of the new version of wireless charging equipment published by FCC on October 24th, 2023, if the following conditions are not met, you need to run ECR! (that is, the lab inquiry before the test) The applicant submits a consultation to the FCC official according to the KDB guidelines to obtain FCC authorization.